Shenzhen Tongxinke Electronic Technology Co., Ltd.

ภาษาไทย

WhatsApp:
+86 17287775445

Select Language
ภาษาไทย
บ้าน> ผลิตภัณฑ์> ตัวเก็บประจุคิวสูง> RF และไมโครเวฟ MLCC> พลังงานสูง RF และไมโครเวฟ MLCC
พลังงานสูง RF และไมโครเวฟ MLCC
พลังงานสูง RF และไมโครเวฟ MLCC
พลังงานสูง RF และไมโครเวฟ MLCC

พลังงานสูง RF และไมโครเวฟ MLCC

รับราคาล่าสุด
สั่งขั้นต่ำ:1
คุณสมบัติของผ...

หมายเลขรุ่นDLC70P(0603)

บรรจุภัณฑ์ และ...

The file is encrypted. Please fill in the following information to continue accessing it

คำอธิบายผลิตภ...
DLC70P(0603) RF และไมโครเวฟ MLCC
คุณสมบัติผลิตภัณฑ์:
ค่า Q สูง, กำลังสูง, ESR/ESL ต่ำ, สัญญาณรบกวนต่ำ, ความถี่เรโซแนนซ์ในตัวสูง, ความน่าเชื่อถือสูง
การใช้งานผลิตภัณฑ์:
การใช้งานฟังก์ชันทั่วไป: การปรับแต่ง บายพาส คัปปลิ้ง การป้อนกลับ การแยก DC และการจับคู่อิมพีแดนซ์
การใช้งานวงจรทั่วไป: เครื่องขยายสัญญาณเสียง RF แบบ Uf/ไมโครเวฟ, มิกเซอร์, ออสซิลเลเตอร์, เครื่องขยายสัญญาณรบกวนต่ำ, เครือข่ายตัวกรอง, วงจรไทม์มิ่ง และวงจรหน่วงเวลา

ตารางความจุ DLC7OP

RF And Microwave MLCC

หมายเลขส่วนประกอบ
RF And Microwave MLCC

RF And Microwave MLCC

ประเภทและขนาดปลาย DLC7OP
หน่วย: นิ้ว (มิลลิเมตร)



กล่องเครื่องมือออกแบบ
Dalykapp มีชุดเครื่องมือออกแบบที่หลากหลาย และตัวเก็บประจุเหล่านี้สอดคล้องกับข้อกำหนด RoHS ความจุแต่ละประเภทมีตัวเก็บประจุ 10 ตัว

RF And Microwave MLCC

ประสิทธิภาพทางไฟฟ้า

ItemS pecification
Quality Factor (Q value) ≥ 2000, at 1 ± 0.1 MHz, 1 ± 0.2 Vrms.
Insulation Resistance (IR) ≥ 10⁵ MΩ at 25°C, rated voltage applied.
 
≥ 10⁴ MΩ at 125°C, rated voltage applied.
Dielectric Withstanding Voltage (DWV) 250% of rated voltage applied for 5 seconds.
Operating Temperature Range -55°C ~ +125°C
 
(Contact Dalicap Technology Co., Ltd. for higher temperature requirements.)
Temperature Coefficient (TC) 0 ± 30 ppm/°C
Capacitance Drift ±0.2% or ±0.05 pF, whichever is greater.
Piezoelectric Effect None

การทดสอบด้านสิ่งแวดล้อม

Item Specification Method
Resistance to Soldering Heat Appearance: No mechanical damage.
 
Capacitance change: -1.0% ~ +2.0% or 0.5 pF, whichever is greater.
 
Q factor: > 1000.
 
Insulation resistance: Not less than the initial requirement value.
Preheat at 150°C ~ 180°C for 1 minute, immerse in solder at 260 ± 5°C for 10 ± 1 seconds, and test after cooling for 24 ± 2 hours.
Thermal Shock Appearance: No mechanical damage.
 
Capacitance change: ≤ 0.5% or 0.5 pF, whichever is greater.
 
Q factor: > 2000.
 
Insulation resistance: ≥ 30% of the initial requirement value.
 
DWV: Meet the initial requirement value.
Test in accordance with MIL-STD-202, Method 107, Condition A.
 
Expose at extreme temperatures for 15 minutes, transition time from minimum to maximum operating temperature ≤ 5 minutes, 5 cycles total.
Moisture Resistance Appearance: No mechanical damage.
 
Capacitance change: ≤ 0.5% or 0.5 pF, whichever is greater.
 
Q factor: > 300.
 
Insulation resistance: ≥ 30% of the initial requirement value.
 
DWV: Meet the initial requirement value.
Test in accordance with MIL-STD-202, Method 106.
Steady State Humidity Heat Appearance: No mechanical damage.
 
Capacitance change: ≤ 0.3% or 0.3 pF, whichever is greater.
 
Q factor: > 300.
 
Insulation resistance: Meet the initial requirement value.
Test in accordance with MIL-STD-202, Method 103, Condition A.
 
(Apply 1.5V DC voltage at 85°C, 85% RH for 240 hours.)
Life (Endurance) Appearance: No mechanical damage.
 
Capacitance change: ≤ 2.0% or 0.5 pF, whichever is greater.
 
Q factor: > 500.
 
Insulation resistance: ≥ 30% of the initial requirement value.
Test in accordance with MIL-STD-202, Method 108.
 
Apply 2× rated voltage at extreme temperature for 2000 hours.

กราฟประสิทธิภาพ DLC7OP

RF And Microwave MLCC

RF And Microwave MLCC

RF And Microwave MLCC


ส่งคำถาม
*
*

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

ส่ง